In acknowledgement of the changing demands of the
marketplace, LSC has introduced a new intelligent dimming and power
distribution unit, the GenVI
Advanced Dimming System. The GenVI
represents the sixth generation of dimmers designed by LSC over its 35 year
history and is built on our extensive experience for today\’s complex lighting
and power control.
Equally at home in the lighting, sound and video markets,
for portable or permanent installation, the new GenVI Advanced Dimming System allows you to configure any of its
outputs in any combination, to be an 8 bit or 16 bit dimmer or a direct power
relay channel. This enables GenVI
to dim traditional lamps or power moving lights, LED fixtures, video screens or
audio power amplifiers—in fact anything where controlled power distribution is
needed.
The colour touchscreen offers the user the ability to set
each channel individually, control the outputs locally and view any external
fault conditions that may be present.
As well as having local and DMX control, GenVI is also RDM (Remote Device
Management) enabled, allowing the user to change the DMX address of the unit,
and view any fault conditions including over-temperature and loss of phase or
DMX signal from any RDM controller.
Each circuit on the GenVI is protected by an RCBO (combination MCB + 30mA RCD)
protection on each circuit rated at either 13A, 16A or 20A. Optional Neutral
disconnect MCBs can be provided where RCDs are not desirable.
The GenVI
Advanced Dimmer System offers a sophisticated riggers\’ control that can replay
scenes or chases, each of which can be individually programmed in addition to a
\”DMX loss\” scene that can be activated as an emergency back up on
loss of a DMX signal. This emergency backup scene can be programmed via the
front panel controls or via a snapshot of the DMX input signal.
